Reply To: Screen randomly flickers (can’t see a pattern)

[pun_intendedMember]

Alas no.. even after setting the boot parameter.. the screen still flickers..

dmesg at that point.. (approximately)

[  +9.851615] pcieport 0000:00:1c.0: AER: Corrected error message received from 0000:00:1c.0
[  +0.000024] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  +0.000005] pcieport 0000:00:1c.0:   device [8086:9d14] error status/mask=00000001/00002000
[  +0.000005] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[  +4.200925] pcieport 0000:00:1c.0: AER: Corrected error message received from 0000:00:1c.0
[  +0.000018] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  +0.000006] pcieport 0000:00:1c.0:   device [8086:9d14] error status/mask=00000001/00002000
[  +0.000006] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[  +9.998820] pcieport 0000:00:1c.0: AER: Corrected error message received from 0000:00:1c.0
[  +0.000019] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  +0.000007] pcieport 0000:00:1c.0:   device [8086:9d14] error status/mask=00000001/00002000
[  +0.000008] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[Jun30 23:33] pcieport 0000:00:1c.0: AER: Corrected error message received from 0000:00:1c.0
[  +0.000029] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  +0.000006] pcieport 0000:00:1c.0:   device [8086:9d14] error status/mask=00000001/00002000
[  +0.000008] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)
[ +18.796622] pcieport 0000:00:1c.0: AER: Corrected error message received from 0000:00:1c.0
[  +0.000013] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  +0.000003] pcieport 0000:00:1c.0:   device [8086:9d14] error status/mask=00000001/00002000
[  +0.000003] pcieport 0000:00:1c.0:    [ 0] RxErr                  (First)

and some ufw logs that I need not share..

My antiX23.1 box specs are here
I revive it using