Brian Masinick
mw # s6-rc, Connman works immediately as expected
11:20:53 AM, 12/21/25
PID TTY STAT TIME COMMAND
1 ? Ss 0:00 /usr/bin/s6-svscan -X3 -- /run/service
Private + Shared = RAM used Program
124.0 KiB + 12.5 KiB = 136.5 KiB s6-linux-init-shutdownd
152.0 KiB + 18.5 KiB = 170.5 KiB ucspilogd
156.0 KiB + 20.5 KiB = 176.5 KiB foreground
152.0 KiB + 28.5 KiB = 180.5 KiB seatd
228.0 KiB + 56.0 KiB = 284.0 KiB s6-ipcserverd (2)
304.0 KiB + 166.5 KiB = 470.5 KiB startup
468.0 KiB + 23.5 KiB = 491.5 KiB s6-fdholderd
356.0 KiB + 221.5 KiB = 577.5 KiB udevil
348.0 KiB + 397.5 KiB = 745.5 KiB icewm-session
628.0 KiB + 207.0 KiB = 835.0 KiB dbus-launch (2)
656.0 KiB + 292.5 KiB = 948.5 KiB devmon
920.0 KiB + 64.0 KiB = 984.0 KiB s6-svscan (2)
852.0 KiB + 169.5 KiB = 1.0 MiB s6-log (7)
836.0 KiB + 305.5 KiB = 1.1 MiB desktop-session
792.0 KiB + 381.5 KiB = 1.1 MiB gconfd-2
1.0 MiB + 511.5 KiB = 1.5 MiB agetty (7)
1.0 MiB + 682.5 KiB = 1.7 MiB at-spi2-registryd
1.4 MiB + 586.0 KiB = 1.9 MiB dbus-daemon (4)
1.5 MiB + 684.5 KiB = 2.1 MiB pipewire-pulse
2.1 MiB + 841.5 KiB = 2.9 MiB conky
1.0 MiB + 2.0 MiB = 3.0 MiB sudo (2)
3.2 MiB + 381.5 KiB = 3.5 MiB udevd
3.0 MiB + 664.5 KiB = 3.6 MiB at-spi-bus-launcher
3.7 MiB + 371.5 KiB = 4.1 MiB connmand
1.2 MiB + 2.9 MiB = 4.1 MiB dhcpcd (5)
3.9 MiB + 719.0 KiB = 4.6 MiB s6-supervise (32)
3.5 MiB + 1.2 MiB = 4.8 MiB pipewire
3.5 MiB + 1.4 MiB = 4.9 MiB bash (2)
4.9 MiB + 1.3 MiB = 6.2 MiB slimski
5.2 MiB + 1.6 MiB = 6.8 MiB wpa_supplicant
6.1 MiB + 5.0 MiB = 11.1 MiB volumeicon
7.7 MiB + 4.7 MiB = 12.4 MiB icewm
13.0 MiB + 1.7 MiB = 14.7 MiB wireplumber
11.4 MiB + 7.4 MiB = 18.8 MiB roxterm
143.4 MiB + 1.3 MiB = 144.7 MiB Xorg
---------------------------------
266.5 MiB
=================================
System:
Kernel: 6.6.101-antix.1-amd64-smp arch: x86_64 bits: 64
compiler: gcc v: 14.2.0 clocksource: tsc
Desktop: IceWM v: 3.9.0 dm: slimski v: 1.5.0
Distro: antiX-25-b2_x64-full Stephen Kapos 17 December 2025
base: Debian GNU/Linux 13 (trixie)
Machine:
Type: Laptop System: LENOVO product: 21CF003TUS
v: ThinkPad T14 Gen 3 serial: <superuser required> Chassis:
type: 10 serial: <superuser required>
Mobo: LENOVO model: 21CF003TUS v: SDK0T76530 WIN
serial: <superuser required>
part-nu: LENOVO_MT_21CF_BU_Think_FM_ThinkPad T14 Gen 3
uuid: <superuser required> Firmware: UEFI vendor: LENOVO
v: R23ET82W (1.58 ) date: 03/04/2025
Battery:
ID-1: BAT0 charge: 53 Wh (97.2%) condition: 54.6/52.5 Wh (104%)
volts: 16.78 min: 15.44 model: Celxpert LNV-5B10W51866�
type: Li-poly serial: <filter> charging: status: full control:
start: 0% end: 100% cycles: 34
CPU:
Info: 8-core model: AMD Ryzen 7 PRO 6850U with Radeon Graphics
bits: 64 type: MT MCP smt: enabled arch: Zen 3+ rev: 1 cache:
L1: 512 KiB L2: 4 MiB L3: 16 MiB
Speed (MHz): avg: 1397 min/max: 1600/4769 boost: enabled cores:
1: 1397 2: 1397 3: 1397 4: 1397 5: 1397 6: 1397 7: 1397 8: 1397
9: 1397 10: 1397 11: 1397 12: 1397 13: 1397 14: 1397 15: 1397
16: 1397 bogomips: 86239
Flags-basic: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2
sse4a ssse3 svm
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Rembrandt [Radeon
680M] vendor: Lenovo driver: amdgpu v: kernel arch: RDNA-2
pcie: speed: 16 GT/s lanes: 16 ports: active: eDP-1 empty: DP-1,
DP-2, DP-3, DP-4, DP-5, DP-6, HDMI-A-1 bus-ID: 04:00.0
chip-ID: 1002:1681 class-ID: 0300 temp: 45.0 C
Device-2: Chicony Integrated Camera driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 5-1:2
chip-ID: 04f2:b74f class-ID: fe01 serial: <filter>
Display: server: X.Org v: 21.1.16 driver: X: loaded: amdgpu
unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu
resolution: 1920x1200~60Hz
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.0.7-2
glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics
(radeonsi rembrandt LLVM 19.1.7 DRM 3.54
6.6.101-antix.1-amd64-smp) device-ID: 1002:1681
Info: Tools: api: eglinfo,glxinfo x11: xdriinfo, xdpyinfo,
xprop, xrandr
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit
Ethernet vendor: Lenovo driver: r8169 v: kernel pcie:
speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 01:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Qualcomm QCNFA765 Wireless Network Adapter
vendor: Lenovo driver: ath11k_pci v: kernel pcie: speed: 5 GT/s
lanes: 1 bus-ID: 02:00.0 chip-ID: 17cb:1103 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 476.94 GiB used: 24.88 GiB (5.2%)
ID-1: /dev/nvme0n1 vendor: Micron model: MTFDKBA512TFK
size: 476.94 GiB speed: 63.2 Gb/s lanes: 4 tech: SSD
serial: <filter> fw-rev: 7003V5LN temp: 28.9 C scheme: GPT
Partition:
ID-1: / size: 93.31 GiB used: 24.88 GiB (26.7%) fs: ext4
dev: /dev/nvme0n1p5
ID-2: /boot/efi size: 96 MiB used: 276 KiB (0.3%) fs: vfat
dev: /dev/nvme0n1p1
Unmounted:
ID-1: /dev/nvme0n1p2 size: 95.37 GiB fs: ext4
ID-2: /dev/nvme0n1p3 size: 95.37 GiB fs: ext4
ID-3: /dev/nvme0n1p4 size: 95.37 GiB fs: ext4
ID-4: /dev/nvme0n1p6 size: 95.37 GiB fs: ext4
Info:
Memory: total: 16 GiB note: est. available: 14.41 GiB
used: 810.2 MiB (5.5%)
Processes: 326 Power: uptime: 11m states: freeze,mem,disk
suspend: s2idle wakeups: 0 hibernate: platform Init: s6 v: N/A
runlevel: Strange... Cannot detect cmdline init... Will try to
execute runlevel using bysybox... executing runlevel
command... default: 2
Packages: pm: dpkg pkgs: 2028 Compilers: gcc: 14.2.0
Shell: Bash v: 5.2.37 running-in: roxterm pinxi: 3.3.40-1--
Brian Masinick
Alternate "Search B":
This search page