AA BB
file ceni.log
[code]
D: | 0 # interfaces(5) file used by ifup(8) and ifdown(8)
D: | 1 # Include files from /etc/network/interfaces.d:
D: | 2 source /etc/network/interfaces.d/*
D: %e = ();
D:
D: Udevadm info starts with the device specified by the devpath and then
D: walks up the chain of parent devices. It prints for every device
D: found, all possible attributes in the udev rules key format.
D: A rule to match, can be composed by the attributes of the device
D: and the attributes from one single parent device.
D:
D: looking at device ‘/devices/pci0000:00/0000:00:1c.2/0000:09:00.0/net/eth0’:
D: KERNEL==”eth0″
D: SUBSYSTEM==”net”
D: DRIVER==””
D: ATTR{netdev_group}==”0″
D: ATTR{addr_len}==”6″
D: ATTR{flags}==”0x1003″
D: ATTR{gro_flush_timeout}==”0″
D: ATTR{testing}==”0″
D: ATTR{carrier_up_count}==”0″
D: ATTR{mtu}==”1500″
D: ATTR{dormant}==”0″
D: ATTR{link_mode}==”0″
D: ATTR{duplex}==”unknown”
D: ATTR{dev_port}==”0″
D: ATTR{proto_down}==”0″
D: ATTR{operstate}==”down”
D: ATTR{napi_defer_hard_irqs}==”0″
D: ATTR{broadcast}==”ff:ff:ff:ff:ff:ff”
D: ATTR{speed}==”-1″
D: ATTR{addr_assign_type}==”0″
D: ATTR{type}==”1″
D: ATTR{tx_queue_len}==”1000″
D: ATTR{carrier_changes}==”0″
D: ATTR{ifalias}==””
D: ATTR{iflink}==”2″
D: ATTR{carrier_down_count}==”0″
D: ATTR{dev_id}==”0x0″
D: ATTR{ifindex}==”2″
D: ATTR{address}==”00:14:22:f7:14:24″
D: ATTR{carrier}==”0″
D:
D: looking at parent device ‘/devices/pci0000:00/0000:00:1c.2/0000:09:00.0’:
D: KERNELS==”0000:09:00.0″
D: SUBSYSTEMS==”pci”
D: DRIVERS==”tg3″
D: ATTRS{subsystem_device}==”0x01c2″
D: ATTRS{max_link_speed}==”2.5 GT/s PCIe”
D: ATTRS{vendor}==”0x14e4″
D: ATTRS{d3cold_allowed}==”1″
D: ATTRS{current_link_speed}==”2.5 GT/s PCIe”
D: ATTRS{msi_bus}==”1″
D: ATTRS{device}==”0x1600″
D: ATTRS{local_cpulist}==”0-1″
D: ATTRS{class}==”0x020000″
D: ATTRS{driver_override}==”(null)”
D: ATTRS{local_cpus}==”3″
D: ATTRS{enable}==”1″
D: ATTRS{irq}==”26″
D: ATTRS{revision}==”0x02″
D: ATTRS{broken_parity_status}==”0″
D: ATTRS{dma_mask_bits}==”32″
D: ATTRS{ari_enabled}==”0″
D: ATTRS{devspec}==””
D: ATTRS{max_link_width}==”1″
D: ATTRS{current_link_width}==”1″
D: ATTRS{consistent_dma_mask_bits}==”32″
D: ATTRS{subsystem_vendor}==”0x1028″
D:
D: looking at parent device ‘/devices/pci0000:00/0000:00:1c.2’:
D: KERNELS==”0000:00:1c.2″
D: SUBSYSTEMS==”pci”
D: DRIVERS==”pcieport”
D: ATTRS{subsystem_device}==”0x01c2″
D: ATTRS{max_link_speed}==”2.5 GT/s PCIe”
D: ATTRS{vendor}==”0x8086″
D: ATTRS{d3cold_allowed}==”1″
D: ATTRS{current_link_speed}==”2.5 GT/s PCIe”
D: ATTRS{msi_bus}==”1″
D: ATTRS{device}==”0x27d4″
D: ATTRS{local_cpulist}==”0-1″
D: ATTRS{class}==”0x060400″
D: ATTRS{driver_override}==”(null)”
D: ATTRS{local_cpus}==”3″
D: ATTRS{enable}==”1″
D: ATTRS{irq}==”18″
D: ATTRS{revision}==”0x01″
D: ATTRS{secondary_bus_number}==”9″
D: ATTRS{broken_parity_status}==”0″
D: ATTRS{dma_mask_bits}==”32″
D: ATTRS{subordinate_bus_number}==”9″
D: ATTRS{ari_enabled}==”0″
D: ATTRS{devspec}==””
D: ATTRS{max_link_width}==”1″
D: ATTRS{current_link_width}==”1″
D: ATTRS{consistent_dma_mask_bits}==”32″
D: ATTRS{subsystem_vendor}==”0x1028″
D:
D: looking at parent device ‘/devices/pci0000:00’:
D: KERNELS==”pci0000:00″
D: SUBSYSTEMS==””
D: DRIVERS==””
D:
D: P: /devices/pci0000:00/0000:00:1c.2/0000:09:00.0/net/eth0
D: E: DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:09:00.0/net/eth0
D: E: ID_BUS=pci
D: E: ID_MODEL_FROM_DATABASE=NetXtreme BCM5752 Gigabit Ethernet PCI Express (Latitude D620)
D: E: ID_MODEL_ID=0x1600
D: E: ID_NET_NAME_MAC=enx001422f71424
D: E: ID_NET_NAME_PATH=enp9s0
D: E: ID_OUI_FROM_DATABASE=Dell Inc.
D: E: ID_PCI_CLASS_FROM_DATABASE=Network controller
D: E: ID_PCI_SUBCLASS_FROM_DATABASE=Ethernet controller
D: E: ID_VENDOR_FROM_DATABASE=Broadcom Inc. and subsidiaries
D: E: ID_VENDOR_ID=0x14e4
D: E: IFINDEX=2
D: E: INTERFACE=eth0
D: E: SUBSYSTEM=net
D: E: USEC_INITIALIZED=4592146
D:
D:
D: Udevadm info starts with the device specified by the devpath and then
D: walks up the chain of parent devices. It prints for every device
D: found, all possible attributes in the udev rules key format.
D: A rule to match, can be composed by the attributes of the device
D: and the attributes from one single parent device.
D:
D: looking at device ‘/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0’:
D: KERNEL==”wlan0″
D: SUBSYSTEM==”net”
D: DRIVER==””
D: ATTR{netdev_group}==”0″
D: ATTR{addr_len}==”6″
D: ATTR{flags}==”0x1003″
D: ATTR{gro_flush_timeout}==”0″
D: ATTR{testing}==”0″
D: ATTR{carrier_up_count}==”0″
D: ATTR{mtu}==”1500″
D: ATTR{dormant}==”0″
D: ATTR{link_mode}==”0″
D: ATTR{dev_port}==”0″
D: ATTR{proto_down}==”0″
D: ATTR{operstate}==”down”
D: ATTR{napi_defer_hard_irqs}==”0″
D: ATTR{broadcast}==”ff:ff:ff:ff:ff:ff”
D: ATTR{addr_assign_type}==”0″
D: ATTR{type}==”1″
D: ATTR{tx_queue_len}==”1000″
D: ATTR{carrier_changes}==”1″
D: ATTR{name_assign_type}==”1″
D: ATTR{ifalias}==””
D: ATTR{iflink}==”3″
D: ATTR{carrier_down_count}==”1″
D: ATTR{dev_id}==”0x0″
D: ATTR{ifindex}==”3″
D: ATTR{address}==”00:18:de:ac:08:b2″
D: ATTR{carrier}==”0″
D:
D: looking at parent device ‘/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0’:
D: KERNELS==”0000:0c:00.0″
D: SUBSYSTEMS==”pci”
D: DRIVERS==”iwl3945″
D: ATTRS{subsystem_device}==”0x1020″
D: ATTRS{retry_rate}==”1″
D: ATTRS{flags}==”0x8005″
D: ATTRS{measurement}==””
D: ATTRS{max_link_speed}==”2.5 GT/s PCIe”
D: ATTRS{vendor}==”0x8086″
D: ATTRS{d3cold_allowed}==”1″
D: ATTRS{current_link_speed}==”2.5 GT/s PCIe”
D: ATTRS{msi_bus}==”1″
D: ATTRS{device}==”0x4222″
D: ATTRS{local_cpulist}==”0-1″
D: ATTRS{class}==”0x028000″
D: ATTRS{driver_override}==”(null)”
D: ATTRS{temperature}==”-133″
D: ATTRS{status}==”0x000002e4″
D: ATTRS{local_cpus}==”3″
D: ATTRS{enable}==”1″
D: ATTRS{tx_power}==”15″
D: ATTRS{antenna}==”0″
D: ATTRS{irq}==”25″
D: ATTRS{filter_flags}==”0x000C”
D: ATTRS{revision}==”0x02″
D: ATTRS{channels}==””
D: ATTRS{broken_parity_status}==”0″
D: ATTRS{dma_mask_bits}==”32″
D: ATTRS{ari_enabled}==”0″
D: ATTRS{devspec}==””
D: ATTRS{max_link_width}==”1″
D: ATTRS{current_link_width}==”1″
D: ATTRS{consistent_dma_mask_bits}==”32″
D: ATTRS{subsystem_vendor}==”0x8086″
D:
D: looking at parent device ‘/devices/pci0000:00/0000:00:1c.1’:
D: KERNELS==”0000:00:1c.1″
D: SUBSYSTEMS==”pci”
D: DRIVERS==”pcieport”
D: ATTRS{subsystem_device}==”0x01c2″
D: ATTRS{max_link_speed}==”2.5 GT/s PCIe”
D: ATTRS{vendor}==”0x8086″
D: ATTRS{d3cold_allowed}==”1″
D: ATTRS{current_link_speed}==”2.5 GT/s PCIe”
D: ATTRS{msi_bus}==”1″
D: ATTRS{device}==”0x27d2″
D: ATTRS{local_cpulist}==”0-1″
D: ATTRS{class}==”0x060400″
D: ATTRS{driver_override}==”(null)”
D: ATTRS{local_cpus}==”3″
D: ATTRS{enable}==”1″
D: ATTRS{irq}==”17″
D: ATTRS{revision}==”0x01″
D: ATTRS{secondary_bus_number}==”12″
D: ATTRS{broken_parity_status}==”0″
D: ATTRS{dma_mask_bits}==”32″
D: ATTRS{subordinate_bus_number}==”12″
D: ATTRS{ari_enabled}==”0″
D: ATTRS{devspec}==””
D: ATTRS{max_link_width}==”1″
D: ATTRS{current_link_width}==”1″
D: ATTRS{consistent_dma_mask_bits}==”32″
D: ATTRS{subsystem_vendor}==”0x1028″
D:
D: looking at parent device ‘/devices/pci0000:00’:
D: KERNELS==”pci0000:00″
D: SUBSYSTEMS==””
D: DRIVERS==””
D:
D: P: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0
D: E: DEVPATH=/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0
D: E: DEVTYPE=wlan
D: E: ID_BUS=pci
D: E: ID_MODEL_FROM_DATABASE=PRO/Wireless 3945ABG [Golan] Network Connection
D: E: ID_MODEL_ID=0x4222
D: E: ID_NET_NAME_MAC=wlx0018deac08b2
D: E: ID_NET_NAME_PATH=wlp12s0
D: E: ID_OUI_FROM_DATABASE=Intel Corporate
D: E: ID_PCI_CLASS_FROM_DATABASE=Network controller
D: E: ID_PCI_SUBCLASS_FROM_DATABASE=Network controller
D: E: ID_VENDOR_FROM_DATABASE=Intel Corporation
D: E: ID_VENDOR_ID=0x8086
D: E: IFINDEX=3
D: E: INTERFACE=wlan0
D: E: SUBSYSTEM=net
D: E: USEC_INITIALIZED=6051756
D:
D: %i = (
‘eth0’ => {
‘id_pci_subclass_from_database’ => ‘Ethernet controller’,
‘subsystems’ => ‘pci’,
‘id_net_name_mac’ => ‘enx001422f71424’,
‘dormant’ => ‘0’,
‘dma_mask_bits’ => ’32’,
‘ari_enabled’ => ‘0’,
‘id_pci_class_from_database’ => ‘Network controller’,
‘broadcast’ => ‘ff:ff:ff:ff:ff:ff’,
‘iflink’ => ‘2’,
‘dev_id’ => ‘0x0’,
‘speed’ => ‘-1’,
‘d3cold_allowed’ => ‘1’,
‘current_link_speed’ => ‘2.5 GT/s PCIe’,
‘max_link_width’ => ‘1’,
‘enable’ => ‘1’,
‘ifindex’ => ‘2’,
‘carrier_down_count’ => ‘0’,
‘interface’ => ‘eth0’,
‘current_link_width’ => ‘1’,
‘kernels’ => ‘0000:09:00.0’,
‘mtu’ => ‘1500’,
‘tx_queue_len’ => ‘1000’,
‘subsystem’ => ‘net’,
‘address’ => ’00:14:22:f7:14:24′,
‘msi_bus’ => ‘1’,
‘carrier_up_count’ => ‘0’,
‘operstate’ => ‘down’,
‘broken_parity_status’ => ‘0’,
‘id_oui_from_database’ => ‘Dell Inc.’,
‘id_bus’ => ‘pci’,
‘testing’ => ‘0’,
‘usec_initialized’ => ‘4592146’,
‘id_net_name_path’ => ‘enp9s0’,
‘id_vendor_from_database’ => ‘Broadcom Inc. and subsidiaries’,
‘secondary_bus_number’ => ‘9’,
‘napi_defer_hard_irqs’ => ‘0’,
‘device’ => ‘0x1600’,
‘drivers’ => ‘tg3’,
‘type’ => ‘1’,
‘id_model_id’ => ‘0x1600’,
‘duplex’ => ‘unknown’,
‘subsystem_device’ => ‘0x01c2’,
‘addr_assign_type’ => ‘0’,
‘local_cpulist’ => ‘0-1’,
‘local_cpus’ => ‘3’,
‘max_link_speed’ => ‘2.5 GT/s PCIe’,
‘carrier_changes’ => ‘0’,
‘flags’ => ‘0x1003’,
‘gro_flush_timeout’ => ‘0’,
‘desc’ => ‘Broadcom and subsidiaries NetXtreme BCM5752 Gigabit PCI Express’,
‘driver_override’ => ‘(null)’,
‘dev_port’ => ‘0’,
‘revision’ => ‘0x02’,
‘subsystem_vendor’ => ‘0x1028’,
‘kernel’ => ‘eth0’,
‘netdev_group’ => ‘0’,
‘sysfs’ => ‘/sys/class/net/eth0’,
‘id_vendor_id’ => ‘0x14e4’,
‘subordinate_bus_number’ => ‘9’,
‘irq’ => ’26’,
‘carrier’ => ‘0’,
‘consistent_dma_mask_bits’ => ’32’,
‘vendor’ => ‘0x14e4’,
‘addr_len’ => ‘6’,
‘connection_type’ => ‘ethernet’,
‘devpath’ => ‘/devices/pci0000:00/0000:00:1c.2/0000:09:00.0/net/eth0’,
‘id_model_from_database’ => ‘NetXtreme BCM5752 Gigabit Ethernet PCI Express (Latitude D620)’,
‘class’ => ‘0x020000’,
‘link_mode’ => ‘0’,
‘proto_down’ => ‘0’
},
‘wlan0’ => {
‘flags’ => ‘0x1003’,
‘desc’ => ‘Intel PRO/Wireless 3945ABG [Golan]’,
‘gro_flush_timeout’ => ‘0’,
‘addr_assign_type’ => ‘0’,
‘local_cpus’ => ‘3’,
‘max_link_speed’ => ‘2.5 GT/s PCIe’,
‘local_cpulist’ => ‘0-1’,
‘retry_rate’ => ‘1’,
‘carrier_changes’ => ‘1’,
‘type’ => ‘1’,
‘tx_power’ => ’15’,
‘device’ => ‘0x4222’,
‘drivers’ => ‘iwl3945’,
‘id_model_id’ => ‘0x4222’,
‘subsystem_device’ => ‘0x1020’,
‘name_assign_type’ => ‘1’,
‘id_net_name_path’ => ‘wlp12s0’,
‘napi_defer_hard_irqs’ => ‘0’,
‘id_vendor_from_database’ => ‘Intel Corporation’,
‘secondary_bus_number’ => ’12’,
‘status’ => ‘0x000002e4’,
‘proto_down’ => ‘0’,
‘devpath’ => ‘/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0’,
‘connection_type’ => ‘wireless’,
‘class’ => ‘0x028000’,
‘link_mode’ => ‘0’,
‘id_model_from_database’ => ‘PRO/Wireless 3945ABG [Golan] Network Connection’,
‘antenna’ => ‘0’,
‘sysfs’ => ‘/sys/class/net/wlan0’,
‘id_vendor_id’ => ‘0x8086’,
‘subordinate_bus_number’ => ’12’,
‘netdev_group’ => ‘0’,
‘subsystem_vendor’ => ‘0x8086’,
‘kernel’ => ‘wlan0’,
‘consistent_dma_mask_bits’ => ’32’,
‘vendor’ => ‘0x8086’,
‘addr_len’ => ‘6’,
‘irq’ => ’25’,
‘carrier’ => ‘0’,
‘revision’ => ‘0x02’,
‘driver_override’ => ‘(null)’,
‘devtype’ => ‘wlan’,
‘dev_port’ => ‘0’,
‘interface’ => ‘wlan0’,
‘ifindex’ => ‘3’,
‘carrier_down_count’ => ‘1’,
‘current_link_speed’ => ‘2.5 GT/s PCIe’,
‘d3cold_allowed’ => ‘1’,
‘enable’ => ‘1’,
‘max_link_width’ => ‘1’,
‘broadcast’ => ‘ff:ff:ff:ff:ff:ff’,
‘id_pci_class_from_database’ => ‘Network controller’,
‘ari_enabled’ => ‘0’,
‘dma_mask_bits’ => ’32’,
‘dev_id’ => ‘0x0’,
‘iflink’ => ‘3’,
‘id_pci_subclass_from_database’ => ‘Network controller’,
‘dormant’ => ‘0’,
‘id_net_name_mac’ => ‘wlx0018deac08b2’,
‘subsystems’ => ‘pci’,
‘id_bus’ => ‘pci’,
‘testing’ => ‘0’,
‘filter_flags’ => ‘0x000C’,
‘id_oui_from_database’ => ‘Intel Corporate’,
‘usec_initialized’ => ‘6051756’,
‘broken_parity_status’ => ‘0’,
‘msi_bus’ => ‘1’,
‘address’ => ’00:18:de:ac:08:b2′,
‘mtu’ => ‘1500’,
‘tx_queue_len’ => ‘1000’,
‘subsystem’ => ‘net’,
‘operstate’ => ‘down’,
‘temperature’ => ‘-133’,
‘carrier_up_count’ => ‘0’,
‘kernels’ => ‘0000:0c:00.0’,
‘current_link_width’ => ‘1’
}
);
W: ‘/sbin/wpa_supplicant -B -i wlan0 -D nl80211,wext -P /run/wpa_supplicant.wlan0.pid -C /run/wpa_supplicant’ failed due to error: at /usr/sbin/ceni line 430.
[code/]