Reply To: How to set the ‘set gfxmode = 1024x768x16, 1024×768’ ?

Forum › Forums › New users › New Users and General Questions › How to set the ‘set gfxmode = 1024x768x16, 1024×768’ ? › Reply To: How to set the ‘set gfxmode = 1024x768x16, 1024×768’ ?

July 17, 2020 at 8:32 am #39042
marcelocripe
Member

    BobC,

    Wow! How many video cards … It is unfortunate to see so many cards that probably work and have been forced to become obsolete.

    AntiX 16.3 is not accepting to maintain the br-abnt2 keyboard configuration, even after I access the Control Center, Session, Keyboard Layout, change from No Change to Portuguese, Close, back to No Change.
    Here are the commands after installing antiX 16.3:

    ————–

    BobC,

    Nossa! Quantas placas de vídeo … É lamentável ver tantas placas que provavelmente funcionem e que foram forçadas a se tornarem obsoletas.

    O antiX 16.3 não esta aceitando manter a configuração do teclado br-abnt2, mesmo após eu acessar o Centro de Controle, Sessão, Disposição do Teclado, alterar de No Change para Português, Fechar, volta para No Change.
    Seguem os comandos após a instalação do antiX 16.3:

    antix@antix:~
$ inxi -Fxz
System:    Host: antix Kernel: 4.4.10-antix.1-amd64-smp x86_64 bits: 64 gcc: 4.9.2 Desktop: IceWM 1.3.8
           Distro: antiX-16.3_x64-full Berta Cáceres 21 December 2017
Machine:   Device: desktop System: Semp Toshiba Informatica Ltda product: STI v: Rev. 10/00 serial: N/A
           Mobo: Semp Toshiba model: STI 910090 v: 4.1 serial: N/A BIOS: Phoenix v: 6.00 PG date: 03/25/2007
CPU:       Single core Intel Celeron (-UP-) arch: Netburst Prescott rev.9 cache: 256 KB
           flags: (lm nx sse sse2 sse3) bmips: 5056 speed: 2528 MHz (max)
Graphics:  Card: VIA CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] bus-ID: 01:00.0
           Display Server: X.Org 1.16.4 driver: vesa Resolution: 1024x768@0.00hz
           OpenGL: renderer: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits)
           version: 3.0 Mesa 10.3.2 Direct Render: Yes
Audio:     Card VIA VT8233/A/8235/8237 AC97 Audio Controller driver: snd_via82xx port: cc00 bus-ID: 00:11.5
           Sound: Advanced Linux Sound Architecture v: k4.4.10-antix.1-amd64-smp
Network:   Card-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
           driver: 8139cp v: 1.3 port: fc00 bus-ID: 00:09.0
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: VIA VT6102 [Rhine-II] driver: via-rhine port: c800 bus-ID: 00:12.0
           IF: eth1 state: down mac: <filter>
Drives:    HDD Total Size: 82.0GB (6.3% used)
           ID-1: /dev/sda model: SAMSUNG_SP0842N size: 80.0GB
           ID-2: USB /dev/sdb model: Drive_SM_USB20 size: 2.0GB
Partition: ID-1: / size: 29G used: 3.0G (11%) fs: ext4 dev: /dev/sda3
           ID-2: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda4
Sensors:   System Temperatures: cpu: 36.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 157 Uptime: 1:44 Memory: 186.9/1938.7MB Init: SysVinit runlevel: 5 Gcc sys: 4.9.2
           Client: Shell (bash 4.3.301) inxi: 2.3.53 
antix@antix:~
$ inxi -G
Graphics:  Card: VIA CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro]
           Display Server: X.Org 1.16.4 driver: vesa Resolution: 1024x768@0.00hz
           OpenGL: renderer: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits) version: 3.0 Mesa 10.3.2
antix@antix:~
$ lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Subsystem: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Flags: bus master, 66MHz, medium devsel, latency 8
	Memory at f4000000 (32-bit, prefetchable) 
	Capabilities: <access denied>
	Kernel driver in use: agpgart-via

00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Flags: bus master, medium devsel, latency 0

00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Flags: bus master, medium devsel, latency 0

00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
	Flags: bus master, medium devsel, latency 0

00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Flags: bus master, medium devsel, latency 0

00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Flags: bus master, medium devsel, latency 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, medium devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fb000000-fcffffff
	Prefetchable memory behind bridge: f0000000-f3ffffff
	Capabilities: <access denied>

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 20)
	Subsystem: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at fc00 
	Memory at fdfff000 (32-bit, non-prefetchable) 
	[virtual] Expansion ROM at 7bf00000 [disabled] 
	Capabilities: <access denied>
	Kernel driver in use: 8139cp

00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7211
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at f800 
	I/O ports at f400 
	I/O ports at f000 
	I/O ports at ec00 
	I/O ports at e800 
	I/O ports at e400 
	Capabilities: <access denied>
	Kernel driver in use: sata_via

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7211
	Flags: bus master, medium devsel, latency 32, IRQ 10
	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
	[virtual] Memory at 000003f0 (type 3, non-prefetchable)
	[virtual] Memory at 00000170 (32-bit, non-prefetchable) 
	[virtual] Memory at 00000370 (type 3, non-prefetchable)
	I/O ports at e000 
	Capabilities: <access denied>
	Kernel driver in use: pata_via

00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7211
	Flags: bus master, medium devsel, latency 32, IRQ 10
	I/O ports at dc00 
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7211
	Flags: bus master, medium devsel, latency 32, IRQ 10
	I/O ports at d800 
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7211
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at d400 
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:10.3 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7211
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at d000 
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7211
	Flags: bus master, medium devsel, latency 32, IRQ 11
	Memory at fdffe000 (32-bit, non-prefetchable) 
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
	Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR Motherboard
	Flags: bus master, stepping, medium devsel, latency 0
	Capabilities: <access denied>

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device b010
	Flags: medium devsel, IRQ 11
	I/O ports at cc00 
	Capabilities: <access denied>
	Kernel driver in use: snd_via82xx

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7211
	Flags: bus master, stepping, medium devsel, latency 32, IRQ 10
	I/O ports at c800 
	Memory at fdffd000 (32-bit, non-prefetchable) 
	Capabilities: <access denied>
	Kernel driver in use: via-rhine

01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] (rev 01) (prog-if 00 [VGA controller])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7211
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10
	Memory at f0000000 (32-bit, prefetchable) 
	Memory at fb000000 (32-bit, non-prefetchable) 
	[virtual] Expansion ROM at fc000000 [disabled] 
	Capabilities: <access denied>

antix@antix:~
$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.4.10-antix.1-amd64-smp root=UUID=62d3f40b-0cf1-4efb-90b8-c8c95df82516 ro zswap.zpool=zsmalloc vga=788 quiet nomodeset

    Brian,

    Eu não gostaria que o BobC perdesse o seu tempo fazendo todos os testes que você sugeriu para criar algo que provavelmente terá outros tantos problemas para fazer funcionar o LibreOffice ou um navegador de internet.

    Caso não seja possível instalar um navegador de internet recente no antiX 16.3, traduzir para português o LibreOffice, manter o teclado em configurado em br-abnt2, o jeito será desistir de usar o antiX 16.3 no computador com a placa de vídeo Via VT8237R Plus e instalar uma distro Linux que funcione.

    O antiX 16.3 se mostrou muito mais estável neste computador com a Placa mãe MSI 238318 e placa de vídeo onboard Via VT8237R Plus do que o SliTaz, além do mais, no outro fórum eu não estou tendo todo o apoio que tenho aqui e isso faz toda a diferença, porque não dá para aprender sozinho uma distribuição Linux, disso eu tenho certeza. Não há vídeos ou conteúdos em português para antiX ou o SliTaz, sem este fórum eu não teria conseguido aprender tanto.

    Se fosse em um MS Windows eu baixaria o driver no site do fabricante e o instalaria, mas no mundo Linux é tudo diferente, leva tempo para aprender e a se acostumar com essa diferença.

    Agradeço a todos que colaboraram nesta postagem.

    marcelocripe

    ————-

    Brian,

    I would not want BobC to waste his time doing all the tests you suggested to create something that will probably have as many problems to make LibreOffice or a web browser work.

    If it is not possible to install a recent internet browser on antiX 16.3, translate LibreOffice into Portuguese, keep the keyboard set to br-abnt2, the way will be to give up using antiX 16.3 on the computer with the Via VT8237R Plus video card and install a working Linux distro.

    AntiX 16.3 proved to be much more stable on this computer with the MSI 238318 motherboard and Via VT8237R Plus onboard video card than SliTaz, besides, in the other forum I am not having all the support I have here and that does all the difference, because you can’t learn a Linux distribution by yourself, I’m sure of that. There are no videos or content in Portuguese for antiX or SliTaz, without this forum I would not have been able to learn so much.

    If it were on an MS Windows I would download the driver from the manufacturer’s website and install it, but in the Linux world everything is different, it takes time to learn and get used to this difference.

    Thanks to everyone who contributed to this post.

    marcelocripe

    • This reply was modified 6 years, 2 months ago by marcelocripe.