Noman01
Rebooted the computer and started all over from the beginning, followed the advice given and it worked this time.
Please select the source for the new live-usb
= Copy from an ISO file
Press <Enter> to select the highlighted entry
Use ‘h’ for help, ‘r’ to redraw, ‘q’ to quit
Please enter the filename
(tab completion is enabled)
/home/gerudd/antiX-19.2-runit_386-full.iso
You entered: /home/gerudd/antiX-19.2-runit_386-full.iso
Is this correct?
= yes
> no
Press <Enter> to select the highlighted entry
Use ‘h’ for help, ‘r’ to redraw, ‘q’ to quit
Will use source file /home/gerudd/antiX-19.2-runit_386-full.iso
Distro: antiX-19.2-runit_386-full Hannie Schaft 27 March 2020
Found grub config 2.0
Total Used Extra
entire drive 7.21 GiB 7.21 GiB 1 MiB
main partition 7.16 GiB 1.11 GiB 6.05 GiB
uefi partition 50 MiB 18 MiB 32 MiB
——————————————————————————-
Ready to make live-usb on device sdb
… by copying file /home/gerudd/antiX-19.2-runit_386-full.iso
——————————————————————————-
Shall we begin?
= yes
> no
> pretend mode
Press <Enter> to select the highlighted entry
Use ‘h’ for help, ‘r’ to redraw, ‘q’ to quit
>> partition-clear
>> partition-make
Using msdos partitioning
>> makefs-bios
>> makefs-uefi
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdb1 ext4 7.2G 17M 7.1G 1% main
/dev/sdb2 vfat 49M 512 49M 1% uefi
>> copy-uefi
copy from iso to uefi partition
files [Ee][Ff][Ii] version
Fix Dell uefi memtest bug
>> copy-main
copy from iso to main partition
copy /antiX/vmlinuz
copy /antiX/initrd.gz
copy remaining files …
|=========================================================================>100%
>> check-usb-md5
check md5 for initrd.gz
check md5 for linuxfs
check md5 for vmlinuz
>> uuids
Using antiX/MX grub config 2.0
>> install
extlinux version 6.04
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdb1 ext4 7.2G 1.2G 6.0G 16% main
/dev/sdb2 vfat 49M 4.2M 45M 9% uefi
>> done
live-usb-maker took 4 minutes and 52 seconds.
Thanks for your help.