Reply To: [solved] WLAN connect but no web pages show (antiX 21 i386)

[Anonymous]

Ich komme einfach nicht weiter. Der Witz ist, dass unter Debian 11 alles problemlos funktioniert – nur ist mir eben das System zu aufgebläht und zu langsam. AntiX ist eigentlich wie für mich gemacht – wäre da nicht das WiFi-Problem.

Connman oder CENI ist immer das gleiche Ergebnis.

I just do not get any further. The joke is that everything works fine on Debian 11 – but the system is just too bloated and too slow for me. AntiX is actually made for me – if it weren’t for the WiFi problem.

Whether with Connman or CENI, the result is always the same.

rfkill list
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 192.168.178.54 icmp_seq=1 Destination Host Unreachable
From 192.168.178.54 icmp_seq=2 Destination Host Unreachable
From 192.168.178.54 icmp_seq=3 Destination Host Unreachable

--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms
pipe 2

dmesg | grep wlan0
[   24.468123] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1284.333413] wlan0: authenticate with f0:b0:14:c6:6c:fa
[ 1284.351413] wlan0: send auth to f0:b0:14:c6:6c:fa (try 1/3)
[ 1284.356910] wlan0: authenticated
[ 1284.368045] wlan0: associate with f0:b0:14:c6:6c:fa (try 1/3)
[ 1284.374823] wlan0: RX AssocResp from f0:b0:14:c6:6c:fa (capab=0x1431 status=0 aid=4)
[ 1284.375152] wlan0: associated
[ 1284.487671] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1284.488076] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by f0:b0:14:c6:6c:fa