Reply To: Black screen using the Geode driver

[AbigailMember]

System:
  Host: AbiPC Kernel: 4.9.0-279-antix.1-486-smp i586 bits: 32 compiler: gcc 
  v: 10.2.1 Console: tty 1 DM: LightDM 1.26.0 
  Distro: antiX-21_386-core Grup Yorum 31 October 2021 
  base: Debian GNU/Linux 11 (bullseye) 
Machine:
  Type: Desktop System: Packard Bell NEC product: 00000000000000000000000 
  v: N/A serial: N/A Chassis: Packard Bell BV type: 13 
  v: ñÑÑÑѕ serial: 50424E 
  Mobo: Packard Bell BV model: SA Series v: Rev 1.00 serial: 0123456789 
  BIOS: Insyde v: S18_V0.5_EC0.8 date: Built: 06/21/2007 
Battery:
  ID-1: BAT0 charge: 0.0 Wh condition: N/A volts: 19.0 min: 19.0 
  model: NBP3A61 type: Li-ion serial: 0000 status: Unknown 
Memory:
  RAM: total: 992.2 MiB used: 80.5 MiB (8.1%) 
  Array-1: capacity: 1024 MiB slots: 1 EC: None max-module-size: 1024 MiB 
  note: est. 
  Device-1: Slot0 size: 1024 MiB speed: N/A type: DDR detail: edo 
  bus-width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified 
  serial: Not Specified 
CPU:
  Info: Single Core model: Geode Integrated by AMD PCS bits: 32 type: UP 
  arch: Geode rev: 2 cache: L2: 128 KiB bogomips: 996 
  Speed: 498 MHz min/max: N/A volts: 1.2 V ext-clock: 33 MHz 
  Core speed (MHz): 1: 498 
  Flags: 3dnow 3dnowext 3dnowprefetch clflush cmov cx8 de fpu mmx mmxext msr 
  pge pse sep tsc vmmcall 
Graphics:
  Message: No device data found. 
  Display: server: X.org 1.20.11 driver: loaded: geode 
  unloaded: fbdev,modesetting,vesa tty: 80x25 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: AMD CS5536 [Geode companion] Audio vendor: Inventec 
  driver: snd_cs5535audio v: kernel bus-ID: 00:0f.3 chip-ID: 1022:2093 
  class-ID: 0401 
  Sound Server-1: ALSA v: k4.9.0-279-antix.1-486-smp running: yes 
  Sound Server-2: PulseAudio v: 14.2 running: no 
Network:
  Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter 
  vendor: Inventec driver: 8139too v: 0.9.28 port: cd00 bus-ID: 00:0d.0 
  chip-ID: 10ec:8139 class-ID: 0200 
  IF: eth0 state: down mac: 00:a0:d1:c2:c1:54 
  Device-2: Qcom Usb2Wlan type: USB driver: N/A bus-ID: 1-4.2:5 
  chip-ID: 18e8:6206 class-ID: 0000 serial: 101d350112 
  WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig 
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB 
  driver: btusb v: 0.8 bus-ID: 2-3:2 chip-ID: 0a12:0001 class-ID: e001 
  Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: not found 
  rfk-block: hardware: no software: no address: see --recommends 
Logical:
  Message: No logical block device data found. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 74.53 GiB used: 2.72 GiB (3.6%) 
  ID-1: /dev/sda vendor: Hitachi model: HTS541680J9AT00 size: 74.53 GiB 
  speed: <unknown> type: N/A serial: SB0242SGFDRMVH rev: A70H scheme: MBR 
  Message: No optical or floppy data found. 
Partition:
  ID-1: / size: 71.8 GiB used: 2.72 GiB (3.8%) fs: ext4 dev: /dev/sda1 
  label: N/A uuid: 128e9a3a-1bdb-4d91-8b1c-bb54917a06c2 
Swap:
  Alert: No swap data was found. 
Unmounted:
  ID-1: /dev/sda2 size: 1.03 GiB fs: N/A label: N/A uuid: N/A 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 1-4:3 info: Standard Microsystems USB 2.0 Hub ports: 2 rev: 2.0 
  speed: 480 Mb/s power: 2mA chip-ID: 0424:2503 class-ID: 0900 
  Device-1: 1-4.1:4 info: Dialogue PenMount USB type: Mouse 
  driver: hid-penmount,usbhid interfaces: 1 rev: 1.0 speed: 12 Mb/s 
  power: 500mA chip-ID: 14e1:6000 class-ID: 0301 
  Device-2: 1-4.2:5 info: Qcom Usb2Wlan type: WiFi driver: N/A interfaces: 1 
  rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 18e8:6206 class-ID: 0000 
  serial: 101d350112 
  Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 1.1 
  speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900 
  Device-1: 2-3:2 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) 
  type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s 
  chip-ID: 0a12:0001 class-ID: e001 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Info:
  Processes: 109 Uptime: 5m wakeups: 2 Init: SysVinit v: 2.96 runlevel: 5 
  default: 5 Compilers: gcc: 10.2.1 alt: 10 Packages: apt: 948 
  Shell: Bash (login) v: 5.1.4 running-in: tty 1 inxi: 3.3.06 

It was kind of hard to even run a Javascript supporting browser in here to just post this repply but Palemoon-nonSSE2 seems to work amazinlgly decent! 🙂