floofybread
@Robin @Wallon
System:
Kernel: 5.10.240-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc
v: 14.3.0 clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.240-antix.1-amd64-smp
root=UUID=cc6f2c2a-996c-46d5-a5c3-07008da69928 ro quiet selinux=0
Desktop: IceWM v: 4.0.0 tools: avail: slock,xlock dm: slimski v: 1.5.0
Distro: antiX-26_x64-full Stephen Kapos 21 March 2026 base: Debian
GNU/Linux 13 (trixie)
Machine:
Type: Laptop System: Apple product: MacBookAir6,2 v: 1.0
serial: <superuser required> Chassis: type: 10 v: Mac-7DF21CB3ED6977E5
serial: <superuser required>
Mobo: Apple model: Mac-7DF21CB3ED6977E5 v: MacBookAir6,2
serial: <superuser required> uuid: <superuser required> UEFI: Apple
v: 433.140.2.0.0 date: 04/18/2022
Memory:
System RAM: total: 4 GiB available: 3.77 GiB used: 1.01 GiB (26.9%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 8 GiB slots: 2 modules: 2 EC: None
max-module-size: 4 GiB note: est.
Device-1: DIMM0 type: DDR3 detail: synchronous size: 2 GiB
speed: 1600 MT/s volts: N/A width: N/A manufacturer: 0x02FE
part-no: 0x45424A3230554638454455302D474E2D4620 serial: <filter>
Device-2: DIMM0 type: DDR3 detail: synchronous size: 2 GiB
speed: 1600 MT/s volts: N/A width: N/A manufacturer: 0x02FE
part-no: 0x45424A3230554638454455302D474E2D4620 serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i5-4250U bits: 64 type: MT MCP arch: Haswell
gen: core 4 level: v3 note: check built: 2013-15 process: Intel 22nm
family: 6 model-id: 0x45 (69) stepping: 1 microcode: 0x26
Topology: cpus: 1x dies: 1 cores: 2 threads: 4 tpc: 2 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 800 min/max: 800/2600 scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 15199
Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2
bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
fsgsbase fxsr ht ibpb ibrs ida invpcid invpcid_single lahf_lm lm mca mce
md_clear mmx monitor movbe msr mtrr nonstop_tsc nopl nx pae pat pbe pcid
pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand
rdtscp rep_good sdbg sep smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi
vpid x2apic xsave xsaveopt xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsa status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Apple driver: i915
v: kernel arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: eDP-1
empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a26
class-ID: 0300
Display: server: X.Org v: 21.1.16 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.00x9.37")
s-diag: 449mm (17.69")
Monitor-1: eDP-1 model: Apple Color LCD built: 2011 res: mode: 1440x900
hz: 60 scale: 100% (1) dpi: 128 gamma: 1.2 chroma: red: x: 0.592 y: 0.341
green: x: 0.329 y: 0.573 blue: x: 0.153 y: 0.133 white: x: 0.314 y: 0.329
size: 286x179mm (11.26x7.05") diag: 337mm (13.3") ratio: 16:10
modes: 1440x900
API: EGL v: 1.5 hw: drv: intel crocus platforms: device: 0 drv: crocus
device: 1 drv: swrast gbm: drv: crocus surfaceless: drv: crocus x11:
drv: crocus inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.0.7-2 glx-v: 1.4
direct-render: yes renderer: Mesa Intel HD Graphics 5000 (HSW GT3)
device-ID: 8086:0a26 memory: 1.46 GiB unified: yes
Info: Tools: api: eglinfo,glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Apple driver: snd_hda_intel
v: kernel bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio driver: snd_hda_intel v: kernel
bus-ID: 00:1b.0 chip-ID: 8086:9c20 class-ID: 0403
Device-3: Broadcom 720p FaceTime HD Camera driver: N/A pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 14e4:1570 class-ID: 0480
API: ALSA v: k5.10.240-antix.1-amd64-smp status: kernel-api with: apulse
type: pulse-emulator tools: alsactl,alsamixer,amixer
Server-1: PipeWire v: 1.4.2 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom BCM4360 802.11ac Dual Band Wireless Network Adapter
vendor: Apple driver: wl v: kernel modules: bcma pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:43a0 class-ID: 0280
IF: wlan0 state: up mac: <filter>
IP v4: <filter> type: dynamic scope: global broadcast: <filter>
IP v6: <filter> scope: link
Info: services: sshd,wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Apple Bluetooth USB Host Controller driver: btusb v: 0.8 type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-3.3:6
chip-ID: 05ac:828f class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: stopped
rfk-block: hardware: no software: yes address: <filter>
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
link-mode: peripheral accept
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 113 GiB used: 8.77 GiB (7.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: SSD TS0128F size: 113 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s tech: SSD
serial: <filter> fw-rev: 0219 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 106.54 GiB size: 104.31 GiB (97.91%) used: 8.76 GiB (8.4%)
fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: rootantiX26
uuid: cc6f2c2a-996c-46d5-a5c3-07008da69928
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
used: 8.8 MiB (1.7%) fs: vfat dev: /dev/sda3 maj-min: 8:3 label: EFI-SYSTEM
uuid: F2E0-4B61
Swap:
Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100)
zswap: no
ID-1: swap-1 type: partition size: 5.96 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/sda2 maj-min: 8:2 label: swapantiX
uuid: 05051da3-97a9-450a-883c-2fcda72be560
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 9 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 1-3:2 info: Broadcom BCM2046B1 USB 2.0 Hub (part of BCM2046
Bluetooth) ports: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 94mA chip-ID: 0a5c:4500 class-ID: 0900
Device-1: 1-3.3:6 info: Apple Bluetooth USB Host Controller
type: bluetooth driver: btusb interfaces: 4 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 05ac:828f
class-ID: fe01
Device-2: 1-5:3 info: Apple Apple Internal Keyboard / Trackpad
type: HID,keyboard,mouse driver: apple,bcm5974,usbhid interfaces: 3 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 500mA
chip-ID: 05ac:0291 class-ID: 0301 serial: <filter>
Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Device-1: 2-3:2 info: Apple Internal Memory Card Reader type: mass storage
driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s)
lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 05ac:8406 class-ID: 0806
serial: <filter>
Sensors:
System Temperatures: cpu: 53.0 C mobo: N/A
Fan Speeds (rpm): N/A
Repos:
Packages: pm: dpkg pkgs: 2155 libs: 1033
tools: apt,apt-get,aptitude,synaptic
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb [signed-by=/etc/apt/keyrings/antix-archive-keyring.gpg] http://ftp.cc.uoc.gr/mirrors/linux/mx/antix/trixie trixie main nonfree nosystemd
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.us.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.de.debian.org/debian/ trixie main contrib non-free non-free-firmware
2: deb http://security.debian.org/ trixie-security main contrib non-free non-free-firmware
No active apt repos in: /etc/apt/sources.list.d/librewolf.list
No active apt repos in: /etc/apt/sources.list.d/liquorix.list
Active apt repos in: /etc/apt/sources.list.d/pitemp.list
1: deb http://deb.debian.org/debian trixie-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/softmaker.list
1: deb http://shop.softmaker.com/repo/apt stable non-free
Active apt repos in: /etc/apt/sources.list.d/trixie-backports.list
1: deb http://deb.debian.org/debian trixie-backports main contrib non-free non-free-firmware
Processes:
CPU top: 5 of 196
1: cpu: 200% command: ps pid: 4249 mem: 3.23 MiB (0.0%)
2: cpu: 18.9% command: falkon pid: 2212 mem: 539.4 MiB (13.9%)
3: cpu: 12.8% command: QtWebEngineProcess pid: 3745 mem: 167.4 MiB (4.3%)
4: cpu: 4.8% command: Xorg pid: 1632 mem: 106.0 MiB (2.7%)
5: cpu: 3.3% command: roxterm pid: 4193 mem: 29.9 MiB (0.7%)
Memory top: 5 of 196
1: mem: 539.4 MiB (13.9%) command: falkon pid: 2212 cpu: 18.9%
2: mem: 167.4 MiB (4.3%) command: QtWebEngineProcess pid: 3745 cpu: 12.8%
3: mem: 106.0 MiB (2.7%) command: Xorg pid: 1632 cpu: 4.8%
4: mem: 64.7 MiB (1.6%) command: QtWebEngineProcess pid: 3773 cpu: 0.7%
5: mem: 58.2 MiB (1.5%) command: QtWebEngineProcess pid: 2226 cpu: 0.0%
Info:
Processes: 196 Power: uptime: 6m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 1.48 GiB Init: runit v: N/A runlevel: 2
default: 5 tool: service
Compilers: gcc: 14.2.0 Shell: Bash v: 5.2.37 running-in: roxterm
inxi: 3.3.39
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics driver: i915 v: kernel
Display: server: X.Org v: 21.1.16 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: crocus gpu: i915 resolution: 1440x900~60Hz
API: EGL v: 1.5 drivers: crocus,swrast
platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.0.7-2
renderer: Mesa Intel HD Graphics 5000 (HSW GT3)
Info: Tools: api: eglinfo,glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandrX.Org X Server 1.21.1.16
X Protocol Version 11, Revision 0
Current Operating System: Linux Shitaro 5.10.240-antix.1-amd64-smp #1 SMP Sat Aug 23 16:01:11 EEST 2025 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.240-antix.1-amd64-smp root=UUID=cc6f2c2a-996c-46d5-a5c3-07008da69928 ro quiet selinux=0
xorg-server 2:21.1.16-1.3.0nosystemd1 (https://www.debian.org/support)
Current version of pixman: 0.44.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.- This reply was modified 5 months ago by floofybread.