(SOLVED) Howto avoid the need to manually reconnect wifi every time I boot?

[Anonymous]

I connect to wifi, however I have to reconnect evert time I boot up?

Joe

[rokytnjiForum Admin]

What are you connecting with? Ceni or Wicd? Post a terminal readout before you reconnect of

inxi -Fxz

in your next reply and before you reconnect however you do it. Paste output from terminal into a text file. Then copy and paste readout from your saved text file in your next reply .

sudo ifconfig -a

will be needed also before you reconnect.

Sometimes I drive a crooked road to get my mind straight.
I don't suffer from insanity. I enjoy every minute of it.
Motorcycle racing is rocket science.

Linux Registered User # 475019
How to Search for AntiX solutions to your problems

[BitJamForum Admin]

If you are connecting with wicd instead of ceni then you need to enable the wicd service. As root edit the file /etc/default/wicd and change one line to:

START_DAEMON=yes

If you use ceni then it reconnects automatically even when the wicd daemon is turned off.

[...] almost any English person would accept "bully" as a synonym for "Fascist". -- George Orwell (1944)

[fatmacMember]

I had the same problem on my Acer 11.6″ netbook, what fixed it for me was trying to connect with ceni as well as using wicd, next time I booted up I got my wifi automatically connecting, & it’s been working OK ever since.

Linux (& BSD) since 1999
Ultra Small Form Factor & thin client computers

[Anonymous]

got is, ty

[FonsisMember]

Why is the wicd daemon turned off by default?

And why do we have wicd AND ceni implemented in antix? Is there any good reason for having both?

Best regards,
Fonsis
🙂

[capreaModerator]

IIRC the 3 or 4 different programs that tried to bring up the network during boot caused some conflicts on antix17 during the test phase.
So the developers decided to go this way.
On the live iso you can use the F4 option and select wicd on.This will carry over to the installed system and wicd will autoconnect at bootup.
Anyway ceni is the default for wifi on antix.

For someone who is new to linux wicd certainly looks easier.

Some people prefer ceni and some wicd.It’s difficult to make everyone right.
I personally prefer ceni for desktops and wicd for laptops, which I use in different places.

• This reply was modified 8 years, 8 months ago by caprea.

[anticapitalistaForum Admin]

ceni uses a lot less RAM than wicd. Both ceni and wicd use a lot less RAM than Network-manager.

As caprea says, both are useful depending on the task and experience of the user.
Personally, I use ceni all the time.

Philosophers have interpreted the world in many ways; the point is to change it.

antiX with runit - leaner and meaner.

[Anonymous]

BitJam wrote:

If you are connecting with wicd instead of ceni then you need to enable the wicd service. As root edit the file /etc/default/wicd and change one line to:

START_DAEMON=yes

If you use ceni then it reconnects automatically even when the wicd daemon is turned off.

I’m a newbie and AntiX is my first Linux experience on my old computer. Would you please tell how to change START_DAEMON to “yes”. I use wicd and everytime I boot I need to reconnect to wifi manually.

Thank you.

[capreaModerator]

The easiest way maybe

Open a terminal and type
sudo leafpad /etc/default/wicd

This will open the file wicd, looking like this

# Start the daemon by default, let the user disable it.
# Use "no" (without quotes) to make /etc/init.d/wicd *NOT* start the WICD daemon.
START_DAEMON=no

# By default don't kill connections on daemon shutdown, see
# http://bugs.debian.org/816076 and
# http://bazaar.launchpad.net/~wicd-devel/wicd/experimental/revision/851
DAEMON_ARGS="--keep-connection"

There you can change START_DAEMON=no to START_DAEMON=yes
Close the file and save changes.

[Anonymous]

caprea wrote:

The easiest way maybe

Open a terminal and type
sudo leafpad /etc/default/wicd

Caprea, Thank you for smooth instructions. Done!

[sleekmasonMember]

Just changed to testing base. dist upgrade has messed with my network settings using ceni. The connection won’t stay on reboot. the message i get is:
configuring network interfaces if up: /run/network/wifistate.etho

My wireless is wlan0

looking in /run/network/ shows an ifstate.wlan0 as well. all have only a single entry even after running ceni.
I have 0 experience with this. guessing a line somewhere in /etc/?
In /etc/network/interfaces I have:
#——————————————————————————
# /etc/network/interfaces
#
# interfaces(5) file used by ifup(8) and ifdown(8)
# Used by ceni but not by wicd
#——————————————————————————

auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

allow-hotplug eth1
iface eth1 inet dhcp

allow-hotplug eth2
iface eth2 inet dhcp

allow-hotplug eth3
iface eth3 inet dhcp

allow-hotplug wlan0
iface wlan0 inet dhcp
	wpa-psk xxxxxxxxxxxx
	wpa-ssid ATT234

(The x’s have been changed for my security)

[Author]

Posts