Forum › Forums › antiX-development › antiX Respins › antiX-23.2 – init-diversity – 2025 remaster edition
- This topic has 391 replies, 17 voices, and was last updated Nov 4-12:22 pm by Brian Masinick.
-
AuthorPosts
-
June 11, 2025 at 10:04 am #179095
ProwlerGr
MemberThe init-diversity-installer-data package has been uploaded to my repo (note: it is not the same as the test package I linked to @calciumsodium).
Primary purpose was to deal with some issues that @rokytnji reported with 66 user services after installation.
Package 66-service-boot will need to be upgraded to the latest version for it to be effective.In a nutshell I created run-once script which when first booted into s6-66 on a fresh installation, cleans-up the live “demo” user services & sets-up the scandir & dbus user service for the new user accounts, & then disables itself.
I will upload updated iso’s when I get the chance as I believe this was an important bug on 66 that I now believe has been resolved.
For those who wish to test it before the upload:
sudo apt update && sudo apt upgrade 66-service-boot && sudo apt install init-diversity-installer-datathen create an iso-snapshot which you can use for a new installation (with a properly set-up 66).
June 11, 2025 at 10:31 am #179097anticapitalX
MemberIt’s really enjoyable to observe the development progress of this project.
Looking forward to seeing how this enhancement improves the overall installation experience!
well done @ProwlerGrLet's accept antiX as it is
Pure and Elegant by its natureJune 11, 2025 at 10:56 am #179110
Brian MasinickModeratorIt’s really enjoyable to observe the development progress of this project.
Looking forward to seeing how this enhancement improves the overall installation experience!
well done @ProwlerGrVery true. I picked up today’s changes on both my installed instance and my remastered USB Flash Drive.
It’s really improving; thank you @ProwlerGr
--
Brian Masinick
Alternate "Search B":
This search pageJune 11, 2025 at 11:41 am #179115
Brian MasinickModeratorThe init-diversity-installer-data package has been uploaded to my repo (note: it is not the same as the test package I linked to @calciumsodium).
Primary purpose was to deal with some issues that @rokytnji reported with 66 user services after installation.
Package 66-service-boot will need to be upgraded to the latest version for it to be effective.In a nutshell I created run-once script which when first booted into s6-66 on a fresh installation, cleans-up the live “demo” user services & sets-up the scandir & dbus user service for the new user accounts, & then disables itself.
I will upload updated iso’s when I get the chance as I believe this was an important bug on 66 that I now believe has been resolved.
For those who wish to test it before the upload:
sudo apt update && sudo apt upgrade 66-service-boot && sudo apt install init-diversity-installer-datathen create an iso-snapshot which you can use for a new installation (with a properly set-up 66).
I *thought* my updates took care of this, so I checked it again; the answer is YES. Thanks again @ProwlerGr
--
Brian Masinick
Alternate "Search B":
This search pageJune 15, 2025 at 4:03 pm #179399
Brian MasinickModeratorHere’s the latest stats on a custom report I generated, which I use to check, report, and inventory what I’ve been using and what the resource consumption happens to be, when I’m running just a few things, when it’s busy, etc.
I snagged this report just after I closed a browser and before I opened the current browser instance. This represents the current state of the updated @ProwlerGr init-diversity image and updates, PLUS the @anticapitalista dbus package fix:
mw PID TTY STAT TIME COMMAND 1 ? Ss 0:00 /usr/bin/s6-svscan -t 0 -L 256 /run/66/scandir/0 Private + Shared = RAM used Program 148.0 KiB + 32.5 KiB = 180.5 KiB seatd 224.0 KiB + 65.0 KiB = 289.0 KiB s6-ipcserverd (2) 312.0 KiB + 80.0 KiB = 392.0 KiB s6-svscan (2) 264.0 KiB + 159.5 KiB = 423.5 KiB startup 436.0 KiB + 34.5 KiB = 470.5 KiB 66-shutdownd 384.0 KiB + 104.5 KiB = 488.5 KiB dbus-launch 408.0 KiB + 121.0 KiB = 529.0 KiB s6-fdholderd (2) 356.0 KiB + 222.5 KiB = 578.5 KiB udevil 372.0 KiB + 270.5 KiB = 642.5 KiB icewm-session 428.0 KiB + 324.5 KiB = 752.5 KiB agetty (3) 632.0 KiB + 324.5 KiB = 956.5 KiB devmon 872.0 KiB + 201.5 KiB = 1.0 MiB s6-log (7) 636.0 KiB + 467.5 KiB = 1.1 MiB dconf-service 820.0 KiB + 313.5 KiB = 1.1 MiB desktop-session 844.0 KiB + 747.0 KiB = 1.6 MiB sudo (2) 1.0 MiB + 593.5 KiB = 1.6 MiB dbus-daemon (3) 1.0 MiB + 619.5 KiB = 1.6 MiB at-spi2-registryd 1.1 MiB + 627.5 KiB = 1.7 MiB at-spi-bus-launcher 1.3 MiB + 505.5 KiB = 1.8 MiB upowerd 2.1 MiB + 771.5 KiB = 2.9 MiB conky 2.6 MiB + 609.5 KiB = 3.1 MiB s6-supervise (21) 2.7 MiB + 580.5 KiB = 3.2 MiB udevd 2.5 MiB + 1.3 MiB = 3.7 MiB bash (2) 4.0 MiB + 302.5 KiB = 4.3 MiB connmand 4.3 MiB + 923.5 KiB = 5.2 MiB pulseaudio 4.4 MiB + 1.5 MiB = 6.0 MiB slimski 3.8 MiB + 3.8 MiB = 7.7 MiB volumeicon 7.3 MiB + 565.5 KiB = 7.9 MiB wpa_supplicant 7.4 MiB + 7.2 MiB = 14.7 MiB roxterm 9.0 MiB + 5.8 MiB = 14.8 MiB icewm 12.6 MiB + 3.8 MiB = 16.4 MiB rox 113.5 MiB + 1.8 MiB = 115.3 MiB Xorg --------------------------------- 222.3 MiB ================================= System: Kernel: 6.14.10-1-liquorix-amd64 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 clocksource: tsc Desktop: IceWM v: 3.7.5 dm: slimski v: 1.5.0 Distro: antiX-23.2_x64 May 14 2025 base: Debian GNU/Linux 12 (bookworm) Machine: Type: Laptop System: LENOVO product: 21CF003TUS v: ThinkPad T14 Gen 3 serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: LENOVO model: 21CF003TUS v: SDK0T76530 WIN serial: <superuser required> part-nu: LENOVO_MT_21CF_BU_Think_FM_ThinkPad T14 Gen 3 uuid: <superuser required> UEFI: LENOVO v: R23ET82W (1.58 ) date: 03/04/2025 Battery: ID-1: BAT0 charge: 54.6 Wh (100.0%) condition: 54.6/52.5 Wh (104.0%) volts: 16.8 min: 15.4 model: Celxpert LNV-5B10W51866�� type: Li-poly serial: <filter> status: full cycles: 27 CPU: Info: 8-core model: AMD Ryzen 7 PRO 6850U with Radeon Graphics bits: 64 type: MT MCP smt: enabled arch: Zen 3+ rev: 1 cache: L1: 512 KiB L2: 4 MiB L3: 16 MiB Speed (MHz): avg: 2700 min/max: 1600/2700 boost: enabled cores: 1: 2700 2: 2700 3: 2700 4: 2700 5: 2700 6: 2700 7: 2700 8: 2700 9: 2700 10: 2700 11: 2700 12: 2700 13: 2700 14: 2700 15: 2700 16: 2700 bogomips: 86246 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm Graphics: Device-1: Advanced Micro Devices [AMD/ATI] Rembrandt [Radeon 680M] vendor: Lenovo driver: amdgpu v: kernel arch: RDNA-2 pcie: speed: 16 GT/s lanes: 16 ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, DP-5, DP-6, HDMI-A-1, Writeback-1 bus-ID: 04:00.0 chip-ID: 1002:1681 class-ID: 0300 temp: 50.0 C Device-2: Chicony Integrated Camera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 5-1:2 chip-ID: 04f2:b74f class-ID: fe01 serial: <filter> Display: server: X.Org v: 1.21.1.7 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu resolution: 1920x1200~60Hz API: OpenGL v: 4.6 vendor: amd mesa v: 22.3.6 glx-v: 1.4 es-v: 3.2 direct-render: yes renderer: AMD Radeon Graphics (rembrandt LLVM 15.0.6 DRM 3.61 6.14.10-1-liquorix-amd64) device-ID: 1002:1681 Info: Tools: api: eglinfo,glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Lenovo driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Qualcomm QCNFA765 Wireless Network Adapter vendor: Lenovo Atheros driver: ath11k_pci v: kernel pcie: speed: 5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 17cb:1103 class-ID: 0280 IF: wlan0 state: up mac: <filter> Drives: Local Storage: total: 476.94 GiB used: 12.69 GiB (2.7%) ID-1: /dev/nvme0n1 vendor: Micron model: MTFDKBA512TFK size: 476.94 GiB speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 7003V5LN temp: 29.9 C scheme: GPT Partition: ID-1: / size: 93.31 GiB used: 12.69 GiB (13.6%) fs: ext4 dev: /dev/nvme0n1p4 ID-2: /sys/firmware/efi/efivars size: 248 KiB used: 135 KiB (54.4%) fs: efivarfs source: ERR-102 Unmounted: ID-1: /dev/nvme0n1p1 size: 100 MiB fs: vfat ID-2: /dev/nvme0n1p2 size: 95.37 GiB fs: ext4 ID-3: /dev/nvme0n1p3 size: 95.37 GiB fs: ext4 ID-4: /dev/nvme0n1p5 size: 95.37 GiB fs: ext4 ID-5: /dev/nvme0n1p6 size: 95.37 GiB fs: ext4 Info: Memory: total: N/A available: 14.4 GiB used: 830.7 MiB (5.6%) Processes: 319 Power: uptime: 2h 44m states: freeze,mem,disk suspend: s2idle wakeups: 0 hibernate: platform Init: s6 v: N/A default: 2 Packages: pm: dpkg pkgs: 2076 Compilers: gcc: 12.2.0 Shell: Bash v: 5.2.15 running-in: roxterm pinxi: 3.3.38-3--
Brian Masinick
Alternate "Search B":
This search pageJune 15, 2025 at 4:05 pm #179400
Brian MasinickModeratorps ax | head -2;ps aux | grep dbus PID TTY STAT TIME COMMAND 1 ? Ss 0:00 /usr/bin/s6-svscan -t 0 -L 256 /run/66/scandir/0 root 1532 0.0 0.0 2736 1512 ? S 14:12 0:00 s6-supervise dbus-log root 1533 0.0 0.0 2736 1396 ? S 14:12 0:00 s6-supervise dbus root 1558 0.0 0.0 2732 1300 ? Ss 14:12 0:00 /usr/bin/s6-log -d3 n3 s1000000 /var/log/66/dbus message+ 1566 0.0 0.0 4544 2620 ? Ss 14:12 0:00 dbus-daemon --system --print-pid=4 --nofork --nopidfile --address=unix:path=/run/dbus/system_bus_socket antix 1734 0.0 0.0 6648 2120 ? S 14:12 0:00 dbus-launch --sh-syntax --exit-with-session /usr/bin/icewm-session antix 1735 0.0 0.0 4432 1680 ? Ss 14:12 0:00 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session antix 3310 0.0 0.0 4320 2688 ? S 14:13 0:00 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork --print-address 11 --address=unix:path=/run/user/1000//at-spi/bus_0.0 antix 3478 0.0 0.0 6336 2004 pts/0 S+ 17:05 0:00 grep dbus--
Brian Masinick
Alternate "Search B":
This search pageJune 15, 2025 at 4:07 pm #179401
Brian MasinickModeratorpinxi -zv8y68 System: Kernel: 6.14.10-1-liquorix-amd64 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 clocksource: tsc avail: hpet,acpi_pm parameters: audit=0 intel_pstate=disable amd_pstate=disable BOOT_IMAGE=/boot/vmlinuz-6.14.10-1-liquorix-amd64 root=UUID=0e70a189-5d7f-48c2-a880-7d5ba9cb6002 ro quiet selinux=0 init=/lib/s6-66/s6-66-init Desktop: IceWM v: 3.7.5 tools: avail: slock,xlock dm: slimski v: 1.5.0 Distro: antiX-23.2_x64 May 14 2025 base: Debian GNU/Linux 12 (bookworm) Machine: Type: Laptop System: LENOVO product: 21CF003TUS v: ThinkPad T14 Gen 3 serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: LENOVO model: 21CF003TUS v: SDK0T76530 WIN serial: <superuser required> part-nu: LENOVO_MT_21CF_BU_Think_FM_ThinkPad T14 Gen 3 uuid: <superuser required> UEFI: LENOVO v: R23ET82W (1.58 ) date: 03/04/2025 Battery: ID-1: BAT0 charge: 54.6 Wh (100.0%) condition: 54.6/52.5 Wh (104.0%) volts: 16.8 min: 15.4 model: Celxpert LNV-5B10W51866�� type: Li-poly serial: <filter> status: full cycles: 27 Memory: System RAM: total: 16 GiB available: 14.4 GiB used: 1.22 GiB (8.5%) Message: For most reliable report, use superuser + dmidecode. Array-1: capacity: 64 GiB slots: 4 modules: 4 EC: None max-module-size: 16 GiB note: est. Device-1: Channel-A DIMM 0 type: N/A size: 4 GiB speed: 6400 MT/s volts: curr: 0.5 min: 0.5 max: 0.5 width (bits): data: 32 total: 32 manufacturer: Micron Technology part-no: MT62F1G32D4DR-031 WT serial: N/A Device-2: Channel-B DIMM 0 type: N/A size: 4 GiB speed: 6400 MT/s volts: curr: 0.5 min: 0.5 max: 0.5 width (bits): data: 32 total: 32 manufacturer: Micron Technology part-no: MT62F1G32D4DR-031 WT serial: N/A Device-3: Channel-C DIMM 0 type: N/A size: 4 GiB speed: 6400 MT/s volts: curr: 0.5 min: 0.5 max: 0.5 width (bits): data: 32 total: 32 manufacturer: Micron Technology part-no: MT62F1G32D4DR-031 WT serial: N/A Device-4: Channel-D DIMM 0 type: N/A size: 4 GiB speed: 6400 MT/s volts: curr: 0.5 min: 0.5 max: 0.5 width (bits): data: 32 total: 32 manufacturer: Micron Technology part-no: MT62F1G32D4DR-031 WT serial: N/A PCI Slots: Permissions: Unable to run dmidecode. Root privileges required. CPU: Info: model: AMD Ryzen 7 PRO 6850U with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3+ gen: 3 level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25) model-id: 0x44 (68) stepping: 1 microcode: 0xA40410A Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2 smt: enabled cache: L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB desc: 1x16 MiB Speed (MHz): avg: 2700 min/max: 1600/2700 boost: enabled scaling: driver: acpi-cpufreq governor: performance cores: 1: 2700 2: 2700 3: 2700 4: 2700 5: 2700 6: 2700 7: 2700 8: 2700 9: 2700 10: 2700 11: 2700 12: 2700 13: 2700 14: 2700 15: 2700 16: 2700 bogomips: 86246 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de debug_swap decodeassists erms extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip user_shstk v_spec_ctrl v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves xtopology Vulnerabilities: Type: gather_data_sampling status: Not affected Type: ghostwrite status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: old_microcode status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow mitigation: Safe RET Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: always-on; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: Advanced Micro Devices [AMD/ATI] Rembrandt [Radeon 680M] vendor: Lenovo driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, DP-5, DP-6, HDMI-A-1, Writeback-1 bus-ID: 04:00.0 chip-ID: 1002:1681 class-ID: 0300 temp: 49.0 C Device-2: Chicony Integrated Camera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-1:2 chip-ID: 04f2:b74f class-ID: fe01 serial: <filter> Display: server: X.Org v: 1.21.1.7 driver: X: loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x317mm (20.00x12.48") s-diag: 599mm (23.57") Monitor-1: eDP-1 mapped: eDP model: Lenovo 0x403d built: 2021 res: mode: 1920x1200 hz: 60 scale: 100% (1) dpi: 161 gamma: 1.2 chroma: red: x: 0.580 y: 0.333 green: x: 0.329 y: 0.565 blue: x: 0.153 y: 0.129 white: x: 0.314 y: 0.329 size: 302x189mm (11.89x7.44") diag: 356mm (14") ratio: 16:10 modes: 1920x1200, 1920x1080, 1600x1200, 1680x1050, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 640x480 API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi device: 1 drv: swrast gbm: egl: 1.4 drv: kms_swrast surfaceless: drv: radeonsi x11: drv: radeonsi inactive: wayland API: OpenGL v: 4.6 vendor: amd mesa v: 22.3.6 glx-v: 1.4 es-v: 3.2 direct-render: yes renderer: AMD Radeon Graphics (rembrandt LLVM 15.0.6 DRM 3.61 6.14.10-1-liquorix-amd64) device-ID: 1002:1681 memory: 1000 MiB unified: no Info: Tools: api: eglinfo,glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr Audio: Device-1: Advanced Micro Devices [AMD/ATI] Rembrandt Radeon High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 04:00.1 chip-ID: 1002:1640 class-ID: 0403 Device-2: Advanced Micro Devices [AMD] ACP/ACP3X/ACP6x Audio Coprocessor vendor: Lenovo driver: snd_pci_acp6x v: kernel alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh, snd_sof_amd_acp63, snd_sof_amd_acp70 pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 04:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: Advanced Micro Devices [AMD] Family 17h/19h HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 04:00.6 chip-ID: 1022:15e3 class-ID: 0403 API: ALSA v: k6.14.10-1-liquorix-amd64 status: kernel-api with: apulse type: pulse-emulator tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.4.2 status: off with: 1: pipewire-pulse status: off 2: wireplumber status: off tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Qualcomm QCNFA765 Wireless Network Adapter vendor: Lenovo Atheros driver: ath11k_pci v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 link-max: gen: 3 speed: 8 GT/s bus-ID: 02:00.0 chip-ID: 17cb:1103 class-ID: 0280 IF: wlan0 state: up mac: <filter> IP v4: <filter> scope: global broadcast: <filter> IP v6: <filter> scope: link Info: services: wpa_supplicant WAN IP: <filter> Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 476.94 GiB used: 12.7 GiB (2.7%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Micron model: MTFDKBA512TFK size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 7003V5LN temp: 29.9 C scheme: GPT Message: No optical or floppy data found. Partition: ID-1: / raw-size: 95.37 GiB size: 93.31 GiB (97.84%) used: 12.7 GiB (13.6%) fs: ext4 dev: /dev/nvme0n1p4 maj-min: 259:4 label: rootantiX23 uuid: 0e70a189-5d7f-48c2-a880-7d5ba9cb6002 ID-2: /sys/firmware/efi/efivars raw-size: N/A size: 248 KiB used: 135 KiB (54.4%) fs: efivarfs source: ERR-102 Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) zswap: no ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap Unmounted: ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 100 MiB fs: vfat label: N/A uuid: 7A32-33A9 ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 95.37 GiB fs: ext4 label: rootantiX23 uuid: c292f09d-a928-4d51-9001-763413c9f1b1 ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 95.37 GiB fs: ext4 label: rootantiX23 uuid: d3d5e62a-51a2-42cc-92f0-50ce014698a8 ID-4: /dev/nvme0n1p5 maj-min: 259:5 size: 95.37 GiB fs: ext4 label: N/A uuid: 1acd0290-4390-4228-a320-65adcea18e44 ID-5: /dev/nvme0n1p6 maj-min: 259:6 size: 95.37 GiB fs: ext4 label: rootMX23 uuid: 051229f6-e565-4524-a98b-196496895ab5 USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-3:2 info: Genesys Logic Hub ports: 3 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Hub-3: 2-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 3 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-5: 3-1:2 info: Huasheng USB2.0 HUB ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 214b:7250 class-ID: 0900 Hub-6: 3-1.1:4 info: Huasheng USB2.0 HUB ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 214b:7250 class-ID: 0900 Device-1: 3-1.1.1:5 info: KYE Systems (Mouse Systems) Trackbar Emotion type: mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 0458:0007 class-ID: 0301 Device-2: 3-1.1.4:6 info: GEMBIRD MicroSD Card Reader/Writer type: mass storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 150mA chip-ID: 1908:0226 class-ID: 0806 Device-3: 3-3:3 info: Synaptics type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 06cb:00f9 class-ID: ff00 serial: <filter> Hub-7: 4-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-8: 5-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 5-1:2 info: Chicony Integrated Camera type: video driver: uvcvideo interfaces: 5 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA chip-ID: 04f2:b74f class-ID: fe01 serial: <filter> Hub-9: 6-0:1 info: Linux Foundation 3.0 root hub ports: N/A rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-10: 7-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-11: 8-0:1 info: super-speed hub ports: 1 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-12: 9-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-13: 10-0:1 info: super-speed hub ports: 1 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 53.0 C mobo: N/A gpu: amdgpu temp: 49.0 C Fan Speeds (rpm): fan-1: 0 Repos: Packages: pm: dpkg pkgs: 2076 libs: 1019 tools: apt,apt-get,aptitude,synaptic Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb [signed-by=/etc/apt/keyrings/antix-archive-keyring.gpg] http://ftp.osuosl.org/pub/mxlinux/antix/bookworm/ bookworm main nonfree nosystemd dev Active apt repos in: /etc/apt/sources.list.d/bookworm-backports.list 1: deb http://deb.debian.org/debian/ bookworm-backports main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://atl.mirrors.clouvider.net/debian/ bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://atl.mirrors.clouvider.net/debian/ bookworm main contrib non-free non-free-firmware 2: deb http://security.debian.org/ bookworm-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main Active apt repos in: /etc/apt/sources.list.d/init-diversity.list 1: deb http://init-diversity.duckdns.org:8080/ init-diversity antix Active apt repos in: /etc/apt/sources.list.d/liquorix.list 1: deb [arch=amd64 signed-by=/etc/apt/keyrings/liquorix-keyring.gpg] https://liquorix.net/debian/ bookworm main 2: deb-src [arch=amd64 signed-by=/etc/apt/keyrings/liquorix-keyring.gpg] https://liquorix.net/debian/ bookworm main Active apt repos in: /etc/apt/sources.list.d/mozilla.list 1: deb [signed-by=/etc/apt/keyrings/packages.mozilla.org.asc] https://packages.mozilla.org/apt/ mozilla main Active apt repos in: /etc/apt/sources.list.d/extrepo_librewolf.sources 1: deb [arch=amd64 arm64] https://repo.librewolf.net librewolf main Processes: CPU top: 5 of 315 1: cpu: 66.6% command: pinxi started-by: perl pid: 3690 mem: 47.7 MiB (0.3%) 2: cpu: 5.8% command: librewolf pid: 1938 mem: 427.8 MiB (2.9%) 3: cpu: 3.4% command: librewolf pid: 2205 mem: 186.3 MiB (1.2%) 4: cpu: 1.2% command: Xorg pid: 1603 mem: 122.3 MiB (0.8%) 5: cpu: 0.5% command: icewm pid: 1737 mem: 29.4 MiB (0.1%) Memory top: 5 of 315 1: mem: 427.8 MiB (2.9%) command: librewolf pid: 1938 cpu: 5.8% 2: mem: 186.3 MiB (1.2%) command: librewolf pid: 2205 cpu: 3.4% 3: mem: 158.8 MiB (1.0%) command: librewolf pid: 2108 cpu: 0.3% 4: mem: 127.0 MiB (0.8%) command: librewolf pid: 2041 cpu: 0.0% 5: mem: 122.3 MiB (0.8%) command: Xorg pid: 1603 cpu: 1.2% Info: Processes: 315 Power: uptime: 2h 54m states: freeze,mem,disk suspend: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 5.74 GiB services: upowerd Init: s6 v: N/A default: 2 tool: rc-service Compilers: gcc: 12.2.0 Shell: Bash v: 5.2.15 running-in: roxterm pinxi: 3.3.38-3--
Brian Masinick
Alternate "Search B":
This search pageJune 16, 2025 at 7:16 pm #179477
Brian MasinickModeratorNow that antiX 25 Alpha 1 is out, I won’t be doing much new with this one for a while, but I DO have it in place, and it’s improved quite a bit, between the changes @ProwlerGr has made and the recent dbus and connman changes that @anticapitalista made to at least get these services to work consistently; hopefully the other services will remain steady and stable for a while.
Meanwhile, for now, activity shifts to the Alpha testing; I DO have this image INSTALLED and I’ll be keeping it, so from time to time I’ll write about my experiences with it.
--
Brian Masinick
Alternate "Search B":
This search pageJune 16, 2025 at 7:18 pm #179478
Brian MasinickModeratorAnyone who has been helping to test here, please join with us in the Alpha test phase of antiX 25; thanks!
--
Brian Masinick
Alternate "Search B":
This search pageJune 17, 2025 at 6:05 am #179493Xunzi_23
MemberI will setup and join the antiX 25 alpha testing. Thanks to all involved in getting this far.
Many thanks @prowlerGR for all the Init Diversity work. We, that is a couple of users in Germany will
still follow, should you have the time and inclination an ISO with all latest changes included would b
e highly appreciated.June 17, 2025 at 6:20 am #179494ProwlerGr
MemberWe, that is a couple of users in Germany will
still follow, should you have the time and inclination an ISO with all latest changes included would b
e highly appreciated.Posting this here as well
Using @anticapitalista’s alpha antiX-25.a1-runit_x64-full.iso from #post-179451 to do a fresh install & running the following script, will give you the full init-diversity installation.#!/bin/bash [ "$UID" -eq 0 ] || exec sudo bash "$0" "$@" echo "adding ProwlerGr init-diversity repo" wget http://init-diversity.duckdns.org:8080/--gpg-key/init-diversity-repo.gpg -O /etc/apt/trusted.gpg.d/init-diversity-repo.gpg echo "Types: deb URIs: http://init-diversity.duckdns.org:8080/ Suites: init-diversity Components: antix dev Signed-By: /etc/apt/trusted.gpg.d/init-diversity-repo.gpg " > /etc/apt/sources.list.d/init-diversity.sources sudo apt update && sudo apt -y dist-upgrade echo "adding init-diversity runit related packages" sudo apt -y install runit-init-diversity runit runit-service-boot-module runit-service-connmand runit-service-slimski runit-service-dbus runit-service-udevd runit-service-bluetooth runit-service-ssh runit-service-anacron runit-service-manager echo "removing runit-core as this interferes with sysvinit/OpenRC" sudo apt -y purge runit-core-services-antix runit-full-core-services-antix runit-init-antix runit-antix echo "Reinstalling runit-init-diversity as the previous runit-antix purge took things with it" sudo apt -y -o Dpkg::Options::="--force-confmiss" install --reinstall runit-init-diversity runit echo "adding s6-66 related packages" sudo apt -y install s6-66-init-diversity 66-service-connmand 66-service-slimski echo "adding s6-rc related packages" sudo apt -y install s6-rc-init-diversity s6-rc-service-connmand s6-rc-service-slimski s6-rc-dialogbox-manager echo "adding dinit related packages" sudo apt -y install dinit-init-diversity dinit-service-connmand dinit-service-slimski dinit-dialogbox-manager echo "adding sysvinit related packages" sudo apt -y purge --allow-remove-essential sysvinit-utils-antix && sudo apt -y install sysvinit-init-diversity sysv-rc sysvinit-core lsb-base sysvinit-utils echo "adding openrc related packages" sudo apt -y install openrc-init-diversity echo "adding development packages for compiling software from ProwlerGr repos" sudo apt -y install build-essential git-buildpackage dh-exec lintian libexecline-dev libglib2.0-dev po4a lowdown dh-runit libaudit-dev libcap-dev libpam0g-dev meson dh-sysuser doc-base libdbus-1-dev libcryptsetup-dev libblkid-dev libmount-dev libfdisk-dev libpolkit-gobject-1-dev libfido2-dev antix23-desktop-files init-diversity-installer-data iso-template-init-diversity synaptic echo "renaming runit (if it exists) to restore removed conffiles" if [ -e /sbin/runit ]; then mv /sbin/runit /sbin/runit-bak; fi echo "reinstating conffiles for packages that had them removed for runit-antix" sudo apt -o Dpkg::Options::="--force-confmiss" install --reinstall eudev seatd procps slimski connman dbus x11-common initscripts acpi-support acpid anacron ufw smartmontools sane-utils openssh-server avahi-daemon bluez cron cups-daemon gpm haveged init-system-helpers initscripts rpcbind rsync update-rc.d udev defaults && update-rc.d dbus defaults && update-rc.d seatd defaults && update-rc.d slimski defaults && update-rc.d connman defaults echo "restoring runit (if it was renamed to runit-bak)" if [ -e /sbin/runit-bak ]; then mv /sbin/runit-bak /sbin/runit; fiISO can be downloaded from here.
- This reply was modified 1 year, 3 months ago by ProwlerGr. Reason: ISO link provided
June 17, 2025 at 8:06 am #179502
Brian MasinickModeratorI did actually get a little use of init-diversity this morning.
As i indicated the environment is now pretty stable.
--
Brian Masinick
Alternate "Search B":
This search pageJune 17, 2025 at 10:39 am #179514Xunzi_23
MemberMany thanks ProwlerGR, intent in asking for an updated ISO is to (hopefully) get some windoze refugees on board
and show them the miserable performance of buntu gnome and dominant sysd is not the whole story. :-).June 17, 2025 at 3:31 pm #179537
Brian MasinickModeratorinxi -Fxz System: Kernel: 6.6.87-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 14.2.0 Desktop: IceWM v: 3.7.5 Distro: antiX-25.a1_init-diversity_x64 June 17 2025 base: Debian GNU/Linux 13 (trixie) Machine: Type: Laptop System: Dell product: Inspiron 5558 v: N/A serial: <filter> Mobo: Dell model: 086DKN v: A00 serial: <filter> UEFI: Dell v: A18 date: 12/30/2019 Battery: ID-1: BAT0 charge: 30.1 Wh (100.0%) condition: 30.1/41.4 Wh (72.6%) volts: 16.2 min: 14.8 model: Samsung SDI DELL 07G07587587 status: full CPU: Info: dual core model: Intel Core i7-5500U bits: 64 type: MT MCP arch: Broadwell rev: 4 cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB Speed (MHz): avg: 500 min/max: 500/3000 cores: 1: 500 2: 500 3: 500 4: 500 bogomips: 19155 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Graphics: Device-1: Intel HD Graphics 5500 vendor: Dell driver: i915 v: kernel arch: Gen-8 bus-ID: 00:02.0 Device-2: NVIDIA GK208BM [GeForce 920M] vendor: Dell driver: N/A arch: Kepler-2 bus-ID: 08:00.0 Device-3: Suyin Integrated_Webcam_HD driver: uvcvideo type: USB bus-ID: 2-5:3 Display: server: X.Org v: 21.1.16 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 resolution: 1366x768~60Hz API: EGL v: 1.5 drivers: iris,swrast platforms: active: gbm,x11,surfaceless,device inactive: wayland API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.0.5-2 glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 5500 (BDW GT2) Info: Tools: api: eglinfo,glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr Audio: Device-1: Intel Broadwell-U Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:03.0 Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 Device-3: NVIDIA GK208 HDMI/DP Audio driver: snd_hda_intel v: kernel bus-ID: 08:00.1 API: ALSA v: k6.6.87-antix.1-amd64-smp status: kernel-api Server-1: PipeWire v: 1.4.2 status: active Network: Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel bus-ID: 06:00.0 IF: wlan0 state: up mac: <filter> Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 v: kernel port: e000 bus-ID: 07:00.0 IF: eth0 state: down mac: <filter> Bluetooth: Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB bus-ID: 2-6:5 Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: stopped rfk-block: hardware: no software: yes address: <filter> Drives: Local Storage: total: 447.13 GiB used: 9.31 GiB (2.1%) ID-1: /dev/sda vendor: Kingston model: SA400S37480G size: 447.13 GiB Partition: ID-1: / size: 78.19 GiB used: 9.31 GiB (11.9%) fs: ext4 dev: /dev/sda4 Swap: ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) dev: /dev/sda2 ID-2: swap-2 type: file size: 3 GiB used: 0 KiB (0.0%) file: /swap/swap Sensors: System Temperatures: cpu: 56.0 C mobo: N/A sodimm: 37.0 C Fan Speeds (rpm): cpu: 2200 Info: Memory: total: 8 GiB available: 7.68 GiB used: 555.8 MiB (7.1%) igpu: 32 MiB Processes: 164 Uptime: 4m Init: Dinit Packages: 2112 Compilers: gcc: 14.2.0 Shell: Bash v: 5.2.37 inxi: 3.3.38--
Brian Masinick
Alternate "Search B":
This search pageJune 17, 2025 at 5:34 pm #179544ProwlerGr
MemberGreat one @anticapitalista
Why limit the testing to runit?
ISO can be downloaded from here.
#!/bin/bash [ "$UID" -eq 0 ] || exec sudo bash "$0" "$@" echo "adding ProwlerGr init-diversity repo" wget http://init-diversity.duckdns.org:8080/--gpg-key/init-diversity-repo.gpg -O /etc/apt/trusted.gpg.d/init-diversity-repo.gpg echo "Types: deb URIs: http://init-diversity.duckdns.org:8080/ Suites: init-diversity Components: antix dev Signed-By: /etc/apt/trusted.gpg.d/init-diversity-repo.gpg " > /etc/apt/sources.list.d/init-diversity.sources sudo apt update && sudo apt -y dist-upgrade echo "adding init-diversity runit related packages" sudo apt -y install runit-init-diversity runit runit-service-boot-module runit-service-connmand runit-service-slimski runit-service-dbus runit-service-udevd runit-service-bluetooth runit-service-ssh runit-service-anacron runit-service-manager echo "removing runit-core as this interferes with sysvinit/OpenRC" sudo apt -y purge runit-core-services-antix runit-full-core-services-antix runit-init-antix runit-antix echo "Reinstalling runit-init-diversity as the previous runit-antix purge took things with it" sudo apt -y -o Dpkg::Options::="--force-confmiss" install --reinstall runit-init-diversity runit echo "adding s6-66 related packages" sudo apt -y install s6-66-init-diversity 66-service-connmand 66-service-slimski echo "adding s6-rc related packages" sudo apt -y install s6-rc-init-diversity s6-rc-service-connmand s6-rc-service-slimski s6-rc-dialogbox-manager echo "adding dinit related packages" sudo apt -y install dinit-init-diversity dinit-service-connmand dinit-service-slimski dinit-dialogbox-manager echo "adding sysvinit related packages" sudo apt -y purge --allow-remove-essential sysvinit-utils-antix && sudo apt -y install sysvinit-init-diversity sysv-rc sysvinit-core lsb-base sysvinit-utils echo "adding openrc related packages" sudo apt -y install openrc-init-diversity echo "adding development packages for compiling software from ProwlerGr repos" sudo apt -y install build-essential git-buildpackage dh-exec lintian libexecline-dev libglib2.0-dev po4a lowdown dh-runit libaudit-dev libcap-dev libpam0g-dev meson dh-sysuser doc-base libdbus-1-dev libcryptsetup-dev libblkid-dev libmount-dev libfdisk-dev libpolkit-gobject-1-dev libfido2-dev antix23-desktop-files init-diversity-installer-data iso-template-init-diversity synaptic echo "renaming runit (if it exists) to restore removed conffiles" if [ -e /sbin/runit ]; then mv /sbin/runit /sbin/runit-bak; fi echo "reinstating conffiles for packages that had them removed for runit-antix" sudo apt -o Dpkg::Options::="--force-confmiss" install --reinstall eudev seatd procps slimski connman dbus x11-common initscripts acpi-support acpid anacron ufw smartmontools sane-utils openssh-server avahi-daemon bluez cron cups-daemon gpm haveged init-system-helpers initscripts rpcbind rsync update-rc.d udev defaults && update-rc.d dbus defaults && update-rc.d seatd defaults && update-rc.d slimski defaults && update-rc.d connman defaults echo "restoring runit (if it was renamed to runit-bak)" if [ -e /sbin/runit-bak ]; then mv /sbin/runit-bak /sbin/runit; fiThis build is runit.
Will the latest script properly install from the runit configuration?Absolutely, you will need to install @anticapitalista’s alpha antiX-25.a1-runit_x64-full.iso from #post-179451 to run this script and it will transform it to an init-diversity installation.
-
AuthorPosts
- You must be logged in to reply to this topic.